The EZ Speed pool pump motor is factory-programmed to be a drop-in replacement for a standard single or two-speed pool pump motor with only minor programming required. The timer mounted on the EZ Speed motor makes it easy to program operating times and flow rates for maximum energy savings. The 2EZ Speed motor is equipped with a timer and a digitized user interface.
Installation of the 2EZ Speed pool pump motor is quick and easy. The 2EZ Speed motor uses an angled terminal board with simple quick-connect or screw head connections. Simply bring in the two power leads to the angled terminal board and then attach the ground lead to the ground screw on the end shield near the terminal board.
The 2EZ Speed pool pump motor includes a freeze sensor mounted inside the control. If the control is on, the sensor will detect temperatures below 40 degrees Fahrenheit and run the motor on low speed, 30 minutes on and 30 minutes off, until the temperature rises above 40 degrees Fahrenheit. Note: Considering the placement variation of the 2EZ Speed pool pump motor, the freeze sensor can only support, not guarantee, the prevention of pool water freezing.
Posted: Wednesday, August 29th, 2012 @ 12:46 pm
Categories: Pool Equipment, Product Reviews.
Tags: 2EZ Speed Pool Pump Motor, two-speed pool pump motor.
Subscribe to the comments feed if you like. Both comments and pings are currently closed.