How to Install HappyBottom® Pool Pad

HappyBottom Pool Pad is easy to install. First, roll out sections of the pool pad and cut them into pieces one foot longer than the longest dimension of the pool. Next, seam the 4 ft. wide sections together with Sure Seam™ Tape. Finally, flip the pool pad over so the tape is facing the ground and erect the entire pool on top of the pad.

After the pool has been filled with water, trim off the excess pad material around the perimeter of the pool.

Features of HappyBottom Pool Pad

  • Easy to install
  • Extends pool liner life
  • Reduces heat loss
  • Makes bottom cleaning easier
  • High density; low compression
  • May eliminate the need for sand
  • Helps protect liners from punctures
  • Great for pool set-up on concrete
  • Minimizes corrosion of metal components

HappyBottom Pool Pad can add many years of life to your above ground pool and to its liner. Made with special high-density, tough polyethylene foam, HappyBottom Pool Pad provides a puncture-resistant barrier that helps protect the pool liner. It also acts as a vapor barrier to keep corrosion-causing moisture away from metal pool components. A soft, smooth, easy-to-clean pool bottom with reduced indentations and added insulation are just a few of the many valuable benefits of using HappyBottom Pool Pad.

If you have questions about HappyBottom Pool Pad installation, please call 888-718-7946 to speak to a Pool Care Expert.

Posted: Tuesday, July 3rd, 2012 @ 1:10 pm
Categories: How Tos, Product Reviews.
Tags: , .
Subscribe to the comments feed if you like. Both comments and pings are currently closed.

One Response to “How to Install HappyBottom® Pool Pad”

  1. Mortisha Brown Says:

    I bought one of these for our above ground swimming pool and it’s true, it’s easy to install. I worked on it alone since my husband was out of town. Never had a hard time installing it.